Ford Falcon BA BF Tailshaft Centre Bearing 30mm, XR6, CB930 or DCB1000

Restore smooth driveline operation with this VRP tailshaft centre bearing, designed to suit selected Ford Falcon BA and BF applications using the 30mm tailshaft bearing and uni-joint configuration.

The tailshaft centre bearing, also known as a driveshaft centre support bearing, supports the two-piece tailshaft and helps maintain correct driveline alignment while isolating vibration.

As these vehicles age, deterioration of the centre bearing and surrounding rubber support can contribute to driveline vibration, knocking, movement or noise. Replacing a worn centre support assembly helps restore proper tailshaft support and smooth driveline operation.

This complete replacement assembly is ideal for servicing, restoration and driveline repairs on compatible BA and BF Falcon-based vehicles.

Key Features

• Complete tailshaft centre support bearing assembly
• 30mm bearing inside diameter
• Approximately 214mm mounting bolt centres
• Designed for compatible uni-joint tailshaft configurations
• Direct replacement style assembly
• Supports and stabilises the two-piece tailshaft
• Helps reduce driveline movement and vibration caused by a worn support bearing
• Suitable for selected BA and BF Ford applications

Specifications

Part Number: CB930 or DCB1000
Product Type: Tailshaft / Driveshaft Centre Support Bearing
Bearing Inside Diameter: 30mm
Mounting Bolt Spacing: Approx. 214mm centre to centre
Tailshaft Type: Uni-joint configuration
Quantity: 1 complete centre bearing assembly

Vehicle Fitment

Designed to suit selected Ford BA and BF platform vehicles, including applications across:

• Ford Falcon BA
• Ford Falcon BF
• Ford Fairmont BA / BF
• Ford Fairlane BA / BF
• Selected Ford Falcon XR6 applications
• Selected Ford Falcon XR6 Turbo applications
• Selected Ford Falcon XR8 applications
• Selected FPV applications
• Selected 4.0L six-cylinder applications
• Selected 5.4L V8 applications

Depending on the vehicle, applications may include sedan, wagon, utility and cab chassis configurations.

IMPORTANT, CHECK BEFORE ORDERING

BA and BF vehicles were fitted with multiple tailshaft and centre bearing configurations. Do not order from vehicle model alone.

Before purchasing, we strongly recommend checking your existing centre bearing dimensions.

This CB930 assembly has:

• 30mm bearing inside diameter
• Approximately 214mm mounting bolt spacing, measured centre to centre
• Uni-joint style tailshaft configuration

If your existing bearing or tailshaft uses different dimensions or a different configuration, this may not be the correct centre bearing for your vehicle.

Checking these measurements before ordering is the easiest way to confirm correct fitment and avoid unnecessary returns.

Common Signs of a Worn Centre Bearing

A worn or deteriorated tailshaft centre bearing may cause:

• Driveline vibration
• Knocking or clunking during acceleration
• Excessive tailshaft movement
• Noise from underneath the vehicle
• Deteriorated or cracked centre bearing rubber

Because similar symptoms can also be caused by universal joints, tailshaft alignment or other driveline components, the complete driveline should be inspected before replacement.

Installation

The centre bearing forms part of the vehicle's tailshaft assembly and correct installation and alignment are important for smooth driveline operation.

Professional installation is recommended.

When replacing the centre bearing, inspect the surrounding tailshaft components, universal joints and mounting hardware for wear or damage before reassembly.

Why Buy From VRP AUTOMOTIVE?

VRP AUTOMOTIVE focuses on supplying quality automotive replacement components with clear, accurate fitment information.

Rather than relying solely on vehicle model compatibility, we provide the critical dimensions and configuration information needed to help you identify the correct component before ordering.