Holden HQ HJ HX HZ WB Tie Rod Steering Adjuster Rods Pair 2809107

Replace bent, seized or damaged steering adjusters with this pair of tie rod steering adjuster rods, designed to suit Holden HQ, HJ, HX, HZ and WB models, along with compatible late HG applications.

Located between the inner and outer tie rod ends, these adjuster rods form an important part of the steering linkage and allow the effective length of the tie rod assembly to be adjusted when setting the vehicle's front wheel toe alignment.

Original adjuster rods can become bent, damaged or seized after decades of use. They are also sometimes incorrectly used as towing or recovery points, which can distort the rod and make accurate wheel alignment difficult or impossible.

This pair provides a straightforward replacement for worn or damaged originals, making them ideal for steering rebuilds, suspension restorations and front-end overhauls.

Key Features

• Pair of replacement tie rod steering adjuster rods
• Suits Holden HQ, HJ, HX, HZ and WB
• Suits compatible late HG models with female-thread tie rods
• Fits between the inner and outer tie rod ends
• Allows adjustment of front wheel toe-in and toe-out
• Ideal replacement for bent, damaged or seized original adjusters
• Suitable for steering and suspension restoration projects
• Supplied as a pair, enough for both sides of the vehicle

Vehicle Fitment

Holden HQ

• All compatible HQ models

Holden HJ

• All compatible HJ models

Holden HX

• All compatible HX models

Holden HZ

• All compatible HZ models

Holden WB

• All compatible WB models

Holden HG

• Selected late HG applications only
• Must use female-thread tie rods

Important HG Fitment Note

HG vehicles can use different steering components depending on the vehicle and production configuration.

For Holden HG, these adjuster rods are intended specifically for late HG vehicles fitted with female-thread tie rods.

Please inspect your existing steering components before ordering if purchasing for an HG.

What Does the Tie Rod Adjuster Do?

The steering adjuster rod connects the inner and outer tie rod ends.

Rotating the adjuster changes the effective length of the steering linkage, allowing the vehicle's front toe-in or toe-out to be correctly set during wheel alignment.

A straight, serviceable adjuster is therefore important when rebuilding the steering system or attempting to correctly align the front suspension.

Common Reasons for Replacement

Original steering adjusters may require replacement due to:

• Bent adjuster rods
• Seized or corroded threads
• Damaged threads
• Previous impact damage
• Incorrect use as a towing or recovery point
• Difficulty achieving correct wheel alignment
• General deterioration during a steering rebuild

If an adjuster is visibly bent or the threads cannot be adjusted smoothly, replacement should be considered before completing a wheel alignment.

Product Specifications

Product: Tie Rod Steering Adjuster Rods
Also Known As: Steering Adjuster Rod / Tie Rod Adjuster / Steering Adjuster Tube
Vehicle Make: Holden
Primary Fitment: HQ, HJ, HX, HZ, WB
Additional Fitment: Late HG with female-thread tie rods
Location: Front Steering Linkage
Quantity: 2 Adjuster Rods

Cross Reference Part Numbers

The following numbers are provided for identification and cross-reference purposes:

OE Reference: 2809107
TRP-HLN001

Cross-reference numbers are supplied to assist with product identification and do not indicate that this product is manufactured by those brands unless specifically stated.

Package Contents

• 2 x Tie Rod Steering Adjuster Rods

One pair services the left and right steering linkage.

Installation

These adjusters form part of the vehicle's steering system, so correct installation is important.

When replacing the adjuster rods, we recommend inspecting the inner and outer tie rod ends, drag link and surrounding steering components for wear or damage.

A professional wheel alignment should be performed after installation to correctly set the vehicle's front toe alignment.

Never use the steering linkage or tie rod adjuster rods as a towing or vehicle recovery point.

Why Buy From VRP AUTOMOTIVE?

VRP AUTOMOTIVE specialises in mechanical, steering, suspension and restoration components for classic Australian vehicles.

Our focus is on providing clear fitment information and quality replacement components to help enthusiasts, restorers and workshops maintain iconic Holdens properly.

Whether you're carrying out a complete front-end rebuild or replacing a pair of damaged originals, these steering adjusters provide a practical replacement for the ageing components fitted to HQ-WB Holdens.